How to Using Windows Easy Transfer to transfer data to a new computer.Tutorial blog

Introduction of Windows Easy Transfer :
When buying a new computer, one of the most frustrating experiences moving existing data to the new computer from Ctrl.V the past, if you wanted to transmit data, you should copy the data over a network, save it to disk DVD / CD / floppy disk and then copy it back to the new computer or physically take the hard drive from the old computer and install the new computer. problem using these methods was that you could only move files such as documents, pictures, movies, saved games, etc. 

E-mail can be moved, but was process. difficult setup and configuration program, on the other hand, it is not possible, except for professionals, and it was necessary to reconfigure all the applications on the new Vista .Windows change everything bundled with a new application called Windows Easy Transfer, which can be easily transfer data from Windows XP SP2, Windows 2000 SP4, Windows Vista, Windows 7 and Windows 8 operating system important to realize that when you transfer data from Windows 2000 can not transfer settings.

Windows Easy Transfer is a program that comes with Windows Vista, Windows 7 and Windows 8, and when it starts, searches our computer for processing data and settings you want to transfer to a new computer. To migration can be done through a myriad of ways, including USB flash Drives, DVD, network, or by using a new product called Easy Transfer Cable.Co makes this program so powerful and easy to use is that it is wizard driven, so just answer questions, make sure that all data has been correctly selected, and then press button to start Ctrl.V this tutorial we will focus on the migration of our data using Migration cable . we have these two methods, because they are the easiest and fastest way to transfer data.

The types of data can be transferred

Using Windows Easy Transfer, you can transfer most files and settings is a table describing the types of data and settings that can be moved.

Data Type	Specifics
Files and folders	All files that are located in the My Documents, My Pictures, and Shared Documents folder are automatically selected .also add other documents that are in other places.
E-mail messages and settings	E-mail messages, contacts, account settings and address book from Outlook Express, Outlook, Windows Mail and other programs.
Program settings	Programs that are compatible with Windows Vista will have their settings transferred to the new pc .Aby to function properly program must already be installed on your Windows Vista.
User Preferences and settings	Desktop settings, color settings, screen savers, fonts, startup options for Windows, printers, etc.
Internet Settings	Favorites, cookies and settings of Internet Explorer.
Pictures, videos and music	Music files, playlists and albums jsou.Obrázky (gif, jpg, bmp) and personal videos.

Preparing computers using Windows Easy Transfer

Before you can use Windows Easy Transfer on older computers, you must install software. This methods that can be used to install Windows Easy Transfer on the old computer are:

• Windows DVD


• CD that comes with the Easy Transfer Cable


• Media that are created using Windows Easy Transfer in Windows.

Both methods are the easiest to use DVD to install Windows program.program. install the software off Windows DVD only put it in the old computer and when the setup menu appears, click Transfer files and settings from another computer . We have autorun disabled, open the DVD and double-click the setup.exe program.

The following guidelines should be implemented on a new computer running Windows.

1. Click on the Start button.


2. Click on All Programs menu.


3. Click on Accessories


4. Click on System Tools


5. Click the Windows Easy Transfer icon.


6. When you run Windows Easy Transfer starts, click Start a new transfer option


7. On the next screen, you should click on my new computer option.


8. When he asks if we have an easy transfer cable, click on the option labeled No, show me more options.


9. The next screen asks if you have installed Windows Easy Transfer on the old  should choose the option labeled No, I need to install it now .


10. New window asking how we would like to install Windows Easy Transfer on older  options are handling CDs, USB flash drive, external hard disk or a network share, the Windows installation disc or a Windows Easy Transfer DVD.
    
    
    
    • If you choose the CD option, Vista ask for the drive letter that corresponds to the CD or DVD   blank media into the burner and select the drive letter from the drop down menu.  press the Next button to create a software installation on this medium.
    
    
    • If you choose USB flash disk option, Vista ask the driver letter of our USB flash disku.Vyberte driver letter and press the Nextbutton to copy the installation files to disku.Tato option will be dimmed and unavailable if there is no USB flash drive plugged into the computer.
    
    
    • If you select the external hard drive or a shared network folder option, Vista request a folder on an external hard drive or network share where the installation files uloženy.V within this newly created folder, the file autorun.inf and another component called MigWiz.Chcete If you run the installation program to open migwiz folder and double click on Migsetup.exe file.
    
    
    • If you select the Windows installation disk or CD Windows Easy Transfer option, Vista assumes that one of these two methods were used, and ask how we would like to pass on our data.


11. When you finish creating installation media using this media to install Windows Easy Transfer on the old computer.

Using Windows Easy Transfer migration cable

Easy Transfer Cable is a cable that has a USB connector on both ends of the cable gets plugged into both .To allows data transfer between two computers with Windows Easy Transfer program.Pro best speed, it is recommended that you install both ends of the cable into a USB 2.0 port each computer in order to maximize their transmission . necessary to use Migration cable to transfer data in our new computer are listed . Using you go through these instructions tutorial will show you which computer you use.

On the new Vista computer:

1. Click on the Start ( ) button.


2. Click on All Programs menu.


3. Click on the Accessories menu.


4. Click on System Tools menu.


5. Finally, click Windows Easy Transfer icon to start the program program. you will be greeted with an initial screen.
   
   Click Next to continue to the next screen.
   
    


6. It will now be shown on the screen below where the program asks whether it is a new transfer or if you want to continue the old.
   
   Because this is a new convert, click Start a new transfer option


7. On the new screen, the program will ask whether the computer we are performing these steps on the old or new.
   
   How do you make the move to a new computer, you should click on my new computer option.
   


8. Now you will see a screen asking if we Migration cable or need to use a different method for transmitting data.
   
   Because these guidelines are intended for use Migration USB cable, select Yes, I have a cable Migration .
   
   
9. Your computer is now in a state of readiness waiting two computers connected via the Easy Transfer cable. , for the moment, defer inserting Migration cable until you get to the older computer set up and ready it. the steps you need to do on the old computer.

On older computer:

1. Insert the CD that comes with the Easy Transfer Cable on older computers.


2. When the Setup program starts, you should click on the Next button.


3. Select I agree and press the Next button.


4. When the program performs the installation, you should click on the Finish button.

How old computer and new Vista computer:

1. Take one end of the migration of cable and plug it into the old computer via USB . An older computer has a USB 2.0 port, you should use this port to achieve the best bit rate.


2. Take the other end and plug it into the computer's USB port Vista.

On older computer:

1. When you plug the cable into an older computer with a small window asking if you want to transfer suborn.Take no action option, then press the OK button.


2. Click on the Start menu select All Programs and then click Windows Easy Transfer icon.


3. When Windows Easy Transfer welcome screen appears, click the Next button.


4. You will now be on the screen asking whether you want to use Migration cable to transfer files.
   
   
   
   Click to Use Migration Cable (recommended) option. When you select this option, the Windows Easy Transfer program on both computers try to connect to each jiný.Když you join, you will see a screen like the following will appear on the new computer running Windows.
   
   
5. Now, when the connection is established, Windows Easy Transfer on the old machine automatically switches to a new window asking what you want to transfer data. Choose All user accounts, files and settings (Recommended) option.


6. A new screen appears with a list of programs, files, settings, mail data, favorite, etc., which will be moved to the new PC . To data are grouped according to the user, so you can easily see what data the user will be moved. If you are satisfied with the settings, click Transfer button and go to the next step in this příručce.Na other hand, if you want to add files that the program does not automatically select or delete files, click the Private . will take you to a new screen where you can customize the data that will be transferred. Using the Add Files , Add Folders , Select disks , A Exclude folders options to customize the data that will be transferred to the new PC.files or folders that have been added automatically, use the Add Files or Add Folder options to walk with these data to. are also excluded data was transferred by removing the check mark next to every item. Once you have customized information that will be transferred to the new computer, click the Next button to continue.


7. A new screen appears that lets you specify whether the data should be transferred to an Existing Vista, or if the new account should be created for data transmission. To enter a new account, enter the login name that you would like . wanted to use an existing account and then use the drop down menu, select the account that will receive data. create a new account, password, your old account transferred to the new Computer when you log on to the account for the first time, a new computer running Windows prompts you to set up a new password.


8. At this point you begin to transfer data to the new computer. Upon completion of the data transfer, you will see a screen like the one below.
   
   Since the data transfer is complete, you should press the Close button to exit the program.
   
    
   Windows Easy Transfer

On the new Vista computer:

1. After the transfer has been completed you will see a screen listing all the files that have been converted. If you want to see all the information that has been transferred, you can click Show me everything that was transferredmožnost.Až you're done, click the Close button completion of the program.


2. Vista will now ask to unsubscribe to complete .It checks out, and when you log back on, all your settings and data has been transferred to your existing account or a new account if it has been created.

Your data has now been successfully moved to our new computer.

Using Windows Easy Transfer via network

By far the quickest and cheapest way to transfer your data over Internet  those of you who have a network set up, this is definitely the choice you should this  steps described below have already been discussed with screen shots in the previous. we just added the screenshots in this section, if the screen is new to this tutorial.

On the new computer running Windows:

1. Click on the Start ( ) button.


2. Click on All Programs menu.


3. Click on the Accessories menu.


4. Click on System Tools menu.


5. Finally, click Windows Easy Transfer icon to start the program.


6. When the welcome screen, click the Next button to continue.


7. On this screen you will be prompted to start a new transfer or renew .You are implementing a new transfer, select Start a new transfer option.


8. You will now be asked what kind of computer, old or new, you do not using these instructions on a computer running Windows, select My new computer option.


9. Migration asks how you would like to transfer data. Using are going to transfer data over the network, and not through the Easy Transfer cable, select No, show me more options to continue to the next screen .


10. On this screen, select Yes, I installed the way you should have already installed Windows Easy Transfer on the old computer.


11. On this screen, the program asks if you want to transfer data over the network or via removable media. To transfer files over the network, so select Yes, I'll transfer files and settings on the network.


12. To a new computer and an older computer to properly connect and transfer files securely, you must create a key migrate  will use this key to find a new computer running Windows and securely connect to  see below, asks if you have an existing key, or need to create. How'd you do not currently have Windows Easy Transfer key, you  do so, click No, I need the key option.


13. Windows Easy Transfer will now create security and show it to us on the screen. Write down the key as you will need to enter it on an older computer before you can transfer the data to a new pc. Program.Program will now wait for the connection  older computer.

On older computer:

1. Click on our Start menu select All Programs and then click Windows Easy Transfer icon.


2. When Windows Easy Transfer welcome screen appears, click the Next button.


3. On the next screen, click the transfer directly, using a network connection option.


4. When asked how you would like to transfer data over the network, select the option labeled Network Connection .


5. Now you will be asked whether or not you have Windows Migration .To is the key that created on our computer . usingyou select button Yes, I have the key .


6. The program now prompts for Windows Migration. key into the field labeled Enter your Windows Easy Transfer key. Once you're done, click the Next button.


7. You are now presented with a screen asking what type of data you want All user accounts, files and settings (Recommended) option.


8. A new screen appears with a list of programs, files, settings, mail data, favorite, etc., which will be moved to the new pc .To data are grouped according to the user, so you can easily see what data the user will p.you are satisfied with the settings, click Transfer button and go to the next step in this příručce.Na other hand, if you want to add files that the program does not automatically select or delete files, click the Private .will take you to a new screen where you can customize the data that will be transferred. If you clicked on the Customize button you can use the Add Files, Add Folders , select Drives , and Exclude folders options to customize the data that will be transferred to the new pc. files or folders that have been added automatically, use the Add Files or Add Folder to opportunities to walk with these data . also exclude data was transferred from transferred by removing the check next to every item. Once you have customized information that will be transferred to the new computer, click the Next button to continue go to the next step.


9. A new screen appears that lets you specify whether the data should be transferred to the current account or the new account should be created for transmission data.Chcete make a new account, enter the login name that you would like you would like to use existing account and then use the drop down menu, select the account that will receive data.create a new account, password, your old account transferred to the new, when you log in to this account for the first time, a new computer running Windows prompts you to set a new password.


10. At this point the data is transferred to a new pc . transfer is complete, you should press the Close button to exit the program.

On the new computer running Windows:

1. After the transfer has been completed you will see a screen listing all the files . want to see all the information that has been transferred, click Show me everything that was transferred . you're done, click the Close button to exit the program .


2. Vista will now ask to unsubscribe to complete log out and when you log back on, all your settings and data has been transferred to your existing account or a new account if it was created.

Your data has now been successfully migrated to the new computer.
Using Windows Easy Transfer to removable media

Migration also has the ability to transfer our data using removable media .To method is not recommended if you're going small amount of data Due to the limited capacity removable media .using this method will not use too often we only provide brief instructions.

On older computer:

1. Start Windows Easy Transfer, start a new transfer, on an older computer and go through the screens until you are asked how we would like to transfer data. not this challenge, we choose to use a CD, DVD, or other removable media .


2. Now the screen where you will be asked what you would like to removable media used for data transmission. Now you should choose the removable media type you want to use to transfer dat.CD a USB flash disk options are dimmed and unavailable if the appropriate media is inserted into   need a blank media into the CD or DVD burner or USB flash drive connected to the computer for these options are available.o


3. Once you select the removable media that you use, the program will prompt you for a driver letter for this  drive letter and press the Next button.


4. The program will start copying data to removable device that happens, you will see a screen that you should remove the media and insert it into another computer running Windows. Remove the media.

On the new computer running Windows:

1. Insert the removable media to a new computer running Windows.


2. Start Windows Easy Transfer on the new computer and follow the instructions until it asks whether it is a new or existing using we are finishing existing transmission, select Continue a transfer in progress.


3. On the next screen, when it asks what type of transmission To continue, select Removable Media .


4. When you ask for the location of our files, navigate to the removable media, and then press Next button.


5. Follow the remaining instructions on the screen to complete the migration of data from removable media.

Your data has now been transferred to the new computer.

Using Windows Easy Transfer to a clean install updates

When you upgrade from a previous Windows operating system, you have two update methods that you can complete  of them is a local upgrade that will take your current version of XP except XP Pro 64 bit and upgrade to the new version of Windows while maintaining all Data and nastavení.Druhou option is to use a clean install, which will install a completely new version of Windows on your computer and not get over all the data .To is considered as the cleanest installation wont have any legacy data or files copied from a previous version windows system, if you are upgrading from Windows 2000, you must use a clean installation method to upgrade.

For those who like to have a fresh installation, clean installation of the update is definitely the best way to it. Problem  however, is that using this method, your data and settings are  possible, though to get the benefits of keeping data and settings, while a new installation of Windows with Windows Easy uživatele.Stačí start a new Migration program on your old computer and transfer data and settings to a file stored on an external or secondary hard disk .You can use this data and import it into a fresh Windows installation at a later data. K that you follow these steps:

1. Click on our Start menu select All Programs and then click Windows Easy Transfer icon.


2. When Windows Easy Transfer welcome screen appears, click the Next button.


3. When asked how you would like to transfer your files, click Use the CD, DVD, or other removable media option.


4. On the next screen where it asks what type of media you want to use, you should choose the external hard disk or to a network location option.


5. You will now be prompted for the folder to store data. select an existing folder on an external or secondary hard disk or create a new one, and then press the Next button.


6. If all the data you want to transfer is selected, press Transfer .V Otherwise, press the Custom button and add all the information that you want  you are finished, press the Next button.


7. When complete, the data are saved in the specified folder can now close the program.

Now perform a clean installation upgrade to the old computer you are done with the upgrade, you can now run Windows Easy Transfer on your new computer with Windows and import data and settings that you saved to an external or secondary hard disk.Windows Easy Transfer.